72 products
Customer Reviews
Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
I got the pre runner bumper for my Trail Honcho and it fit perfectly. Way more realistic than the plastic bumper it came with.
T
Bought this for my Trail Honcho and it is pretty bad ass
D
I used this on my SCX10II with proline 2016 Tacoma body, it looks and fits great. No more gap from bumper to body :)
Customer Reviews
Based on 3 reviews
67%
(2)
0%
(0)
33%
(1)
0%
(0)
0%
(0)
L
Way better than the stock sliders
J
Had to file my welds down where the double bars met since the weld puddle was so pronounced. Pretty thick weld, just looked way off and not like photos online. Very tough and functional though. Shipping time was long. 21 days before it it was out for delivery. Messages them a couple time before it shipped and never got a response back so direct communication was non-existant.
S
Product is awesome! Fits great and made very well. I will be ordering more from them in the future. Made to order and well worth the wait.
Narrow Winch Front Bumper for Axial Racing SCX10 III Jeep Wrangler JLU/Gladiator
Regular price $57.95 USD
ScalerFab Welded Steel Narrow Winch Front Bumper for Axial SCX10III Jeep Wrangler JLU/Gladiator- Trail Bar & Stinger options available.
(For the SCX10 III Bronco Winch Front Bumper, Click HERE)
*This bumper is made for a bumper-mounted winch and includes pre-drilled holes with the RC4WD Warn Winch pattern. Click for Low-Profile Narrow Bumper without winch holes.
TO MOUNT WINCH: You will need to flip the winch mounting plate in order to install on bumper.
The ScalerFab SCX10 III bumpers are designed to work with the stock Axial body post mounting system. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 115mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 6 washers)
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s)
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
Mounting Instructions:
1. Bumper is made to slide inside the C-channel of the frame rails.
2. Using included screws, mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below. *Use included washer between frame rails and body post mount as a spacer.
3. Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Adjustable, Bolt-On Rock Sliders for Axial Racing SCX10 III Jeep Wrangler JLU
Regular price $39.95 USDScalerFab Steel Axial Racing SCX10III Adjustable, Bolt- On Rock Sliders
Steel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) mount directly to the stock location of the plastic skid plate to replace the stock rock sliders.
Mounting Recommendations:
-Use first hole on front bracket, and second hole on rear bracket to match angled body of the SCX10 III Jeep Wrangler JLU, just like the stock tapered rock sliders.
Specifications:
* 155mm length, adjustable offset.
* Mounts using existing holes in stock skid plate.
* Steel construction - Hand Made/Welded.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: not as susceptible to chips
-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available here: HERE
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.
*Recommend hardware mounting kits available at the top of the page as an optional add-on.**
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Customer Reviews
Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
This bumper is perfect if you’re looking for a low pro comp bumper. The quality and price is unmatched in my opinion. I would recommend to anyone. Had to mod mine a bit due to my pan hard mount on my RPRC frame but worked out awesome!
Customer Reviews
Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
So great to work with. They listened and understood what I was wanting. They communicated through the process. The bumper showed up and was absolutely perfect !! Great company to work with.
j
Scaler Fab stinger is more than a bumper it’s a tool for the front of your crawler helps with up and down transitions where normally you would get stuck or flip forward! Perfect fit and craftsmanship bottom line You need this.
R
[****] the bumper is what I wanted but one weld was a little sloppy but it looks great
Customer Reviews
Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
N
Had front and rear made for my proline Nissan. Measured twice since I did custom width. They are perfect.
S
Got the bumper in for my trx4 with the injora xj body. This bumper fits perfect! Can slide it in or out to get the right fitment. Ill be back for more! Thanks guys! 5*
Adjustable, Bolt-On Rock Sliders for Axial Racing SCX10 III Jeep Gladiator
Regular price $39.95 USDScalerFab Steel Adjustable, Bolt- On Rock Sliders Compatible with Axial Racing SCX10III Gladiator
Steel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) mount directly to the stock location of the plastic skid plate to replace the stock rock sliders.
Mounting Recommendations:
-Use first hole on front bracket, and second hole on rear bracket to match angled body of the SCX10 III Jeep Gladiator, just like the stock tapered rock sliders.
Specifications:
* 205mm length, adjustable offset.
* Mounts using existing holes in stock skid plate.
* Steel construction - Hand Made/Welded.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: not as susceptible to chips
-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available here: HERE
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.
*Recommend hardware mounting kits available at the top of the page as an optional add-on.**
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Comp-Style Front Bumper for Axial Racing SCX10 III Jeep Wrangler JLU/Gladiator
Regular price $58.95 USDOur most low-profile bumper with the best possible approach angle is here for the Axial Racing SCX10III Jeep Wrangler JLU/Gladiator!
RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper
Specifications:
- approx. 79mm wide (Just a bit wider than the frame rails)
- no fore/aft adjustment
- Bumper fits tight to the frame for the best possible approach angle.
- Steel construction - Hand Made/Welded.
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
Mounting Instructions:
1. Bumper is made to slide inside the C-channel of the frame rails.
2. Using screws, mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below. *Use included washer between frame rails and body post mount as a spacer.
3. Back screws with awasher and nut.
**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Customer Reviews
Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Fits and looks great!
Customer Reviews
Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Really love the designs and the easy fit of all Scalerfab Bumpers, rocksliders etc. Looks really cool on my Gladiator. Thanks again for making awesome stuff for our hobby.
Z
Rear Bumper For Axial Racing SCX10 III Jeep Gladiator
D
Awesome quality and great fitment. Can’t go wrong rocking with ScalerFab
Narrow Front Bumper for Axial Racing SCX10 III Jeep Wrangler JLU/Gladiator/Bronco
Regular price $52.95 USD
ScalerFab Welded Steel Narrow Front Bumper for Axial SCX10III Jeep Wrangler/Gladiator/Bronco- Trail Bar & Stinger options available.
*This bumper does NOT fit a winch. Click for Winch Bumper For JLU/Gladiator.
For Bronco Winch Front Bumper, CLICK HERE.
The ScalerFab SCX10 III bumpers are designed to work with the stock Axial body post mounting system. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 115mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 6 washers)
- Mounts using existing holes in frame - does not mount like stock plastic bumper.
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Using included screws, mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below. *Use included washer between frame rails and body post mount as a spacer.
3. Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Customer Reviews
Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Really nice piece customized to my needs
Customer Reviews
Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
This product is super high quality and makes the basecamp look amazing!!
N
These parts are incredible
T
Great rear bumper! Looks absolutely stunning on the basecamp. Only issue is the gap from the frame rails to the tabs. Once tightened down, it was fine.
M
Fit right on look amazing with the body I went with. Very happy with your product.
Metal Replica Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7
Regular price $62.95 USDScalerFab Welded Steel Replica Winch Front Bumper for Axial SCX10III Jeep CJ-7
Trail Bar & Stinger options available.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle while still allowing for a bumper-mounted winch.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
TO MOUNT WINCH: You will need to flip the winch mounting plate in order to install on bumper.
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
ScalerFab Welded Steel Replica Non-Winch Front Bumper for Axial SCX10III Jeep CJ-7 Trail Bar & Stinger options available.
*This bumper does NOT fit a winch. Click for Winch Bumper For CJ-7.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle without sacrificing strength. Don't worry about running a winch - this bumper is designed for maximum performance.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Prerunner Series SCX10 III Base Camp Front Bumper
Regular price $73.95 USDScale looks abound in our latest release for the new Axial Adventure SCX10 III Base Camp Truck!
The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the SCX10 III Base Camp is a low-profile and scale trail armor option.
Full-width Steel, welded Prerunner Series Front Bumper
for the SCX10 III Base Camp
(MADE FOR STOCK VEHICLE- Any modifications may affect clearance. See our low-profile prerunner bumper HERE if running larger tires or adjusting shocks lower)
Specifications:
-Approx. 198mm wide. Wrapped ends match width/angle of body.
- Mounts using included hardware. Spacer/additional washers may be necessary.
- Steel construction - Hand Made/Welded.
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: not as susceptible to chips
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Use washers (included) or spacer (not included) between steering link and frame rails. Use longer screws (included). Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Customer Reviews
Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
J
I went with the flat black w/ shackle mounts, and man it looks gorgeous on the basecamp.
N
Awesome bumpers
T
Perfect fit! Only issue was at full compression, the MTR’s would catch on the sides, some minor trimming and no more issue. Would highly recommend as it made the basecamp look awesome.
M
Great quality craftsmanship. Super stoked! Took a bit once ordered to finally ship but again, great craftsmanship.
Pro Series Narrow Winch Front Bumper for Axial Racing SCX10 III Jeep Wrangler JLU/Gladiator
Regular price $67.95 USD
ScalerFab Welded Steel Pro Series Narrow Winch Front Bumper for Axial SCX10III Jeep Wrangler JLU/Gladiator- Trail Bar & Stinger options available.
*This bumper is made for a bumper-mounted winch and includes pre-drilled holes with the RC4WD Warn Winch pattern. Click for Low-Profile Narrow Bumper without winch holes.
TO MOUNT WINCH: You will need to flip the winch mounting plate in order to install on bumper.
The ScalerFab SCX10 III bumpers are designed to work with the stock Axial body post mounting system. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 115mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 6 washers)
- Laser-cut Gussets for added strength and scale appearance
- Extra attention to detail during finishing process to optimize performance and appearance.
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s)
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
Mounting Instructions:
1. Bumper is made to slide inside the C-channel of the frame rails.
2. Using included screws, mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below. *Use included washer between frame rails and body post mount as a spacer.
3. Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
