The newest additional to the ScalerFab Trail Armor line-up is specifically made for the Axial Adventure SCX10 III Base Camp! Offerings include metal trail armor for stock applications, as well as after-market tire/shock upgrades. See descriptions for more product info.
9 products
Customer Reviews
Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
This product is super high quality and makes the basecamp look amazing!!
N
These parts are incredible
T
Great rear bumper! Looks absolutely stunning on the basecamp. Only issue is the gap from the frame rails to the tabs. Once tightened down, it was fine.
M
Fit right on look amazing with the body I went with. Very happy with your product.
Prerunner Series SCX10 III Base Camp Front Bumper
Regular price $73.95 USDScale looks abound in our latest release for the new Axial Adventure SCX10 III Base Camp Truck!
The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the SCX10 III Base Camp is a low-profile and scale trail armor option.
Full-width Steel, welded Prerunner Series Front Bumper
for the SCX10 III Base Camp
(MADE FOR STOCK VEHICLE- Any modifications may affect clearance. See our low-profile prerunner bumper HERE if running larger tires or adjusting shocks lower)
Specifications:
-Approx. 198mm wide. Wrapped ends match width/angle of body.
- Mounts using included hardware. Spacer/additional washers may be necessary.
- Steel construction - Hand Made/Welded.
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: not as susceptible to chips
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Use washers (included) or spacer (not included) between steering link and frame rails. Use longer screws (included). Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Customer Reviews
Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
D
I absolutely love it! The quality of the craftsmanship is incredible!
J
I went with the flat black w/ shackle mounts, and man it looks gorgeous on the basecamp.
N
Awesome bumpers
T
Perfect fit! Only issue was at full compression, the MTR’s would catch on the sides, some minor trimming and no more issue. Would highly recommend as it made the basecamp look awesome.
K
Great quality craftsmanship. Super stoked! Took a bit once ordered to finally ship but again, great craftsmanship.
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Regular price $58.95 USDOur most low-profile bumper with the best possible approach angle is here for the Axial Adventure SCX10III Base Camp!
RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper
Specifications:
- approx. 79mm wide (Just a bit wider than the frame rails)
- Raised approx. 20mm above the top corner of the frame rails to close body gap
- no fore/aft adjustment
- Bumper fits tight to the frame for the best possible approach angle.
- Steel construction - Hand Made/Welded.
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: not as susceptible to chips
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Regular price $73.95 USDScale looks abound in our latest release for the new Axial Adventure SCX10 III Base Camp Truck!
This Low-Profile Prerunner bumper was designed to fit slightly larger-than-stock tire applications. The width is even with the edges of the body.
Full-width Steel, welded Prerunner Series Front Bumper
for the SCX10 III Base Camp
Specifications:
- Made from 3/16" rod.
- Approx. 170mm wide.
- Mounts using included hardware. Spacer/additional washers may be necessary.
- Steel construction - Hand Made/Welded.
- Does not fit a winch.
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: not as susceptible to chips
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Use washers (included) or spacer (not included) between steering link and frame rails. Use longer screws (included). Back screws with a washer and nut. Does not require use of SCX10 III body-post mounting system.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Customer Reviews
Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Great bumper
A
I'll be honest, ended up using this on my scx10.3 with an aftermarket proline body instead of the factory "Toyota" truck. Man does it look amazing! I went for shackle mounts and a front winch fairlead. The full set of front and rear bumpers plus rock sliders is absolutely beautiful. Haven't gotten a chance to run it yet, but they seem very strong, great quality welds.
1/10 Scale Full-Width Front Bumper For Axial SCX10 III Base Camp
Regular price $53.95 USDAxial Full-Width Steel, Welded Front Bumper for the Axial SCX10 III Base Camp.
Full width and full scale! This Class 1 worthy low-profile front bumper allows for full tire clearance under full turn & compressionIt even includes the ability to mount a winch behind the grill.
(MADE FOR STOCK VEHICLE- Any modifications may affect clearance)
Specifications:
-195mm wide, raised approx. 20mm above top of frame rails to close body gap.
- Predrilled with mounting holes to fit the RC4WD 9.5 CTI hole pattern. *Bumper is made to allow for a bumper-mounted winch behind the grill/body, not in front.
- Mounts using included hardware. Spacer/additional washers may be necessary.
- Steel construction - Hand Made/Welded.
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: not as susceptible to chips
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
