1/10 Scale Full-Size Rear Bumper for Traxxas TRX4 1970's Series (Chevy K5 Blazer, K10 Truck, F150 Truck)

$54.95 USD

Full-size Steel, welded rear bumper for theTraxxas TRX4 1970's Series (Chevy K5 Blazer, K10 Truck, F150 Truck)

Adventure-ready, this 1/10 scale full-size rear bumper for the Traxxas TRX4 1970's Series brings strength and a low profile to your Chevy K5 Blazer, K10 Truck, or F150 Truck. Experience an exciting new level of realism with this TRX4 Scale Rear Bumper!

***Note Shackle Mounts Option will be tucked under bumper as to not impede with departure angle.

Specifications:
- 193 to 200 mm wide (tapers from front to back)
-Fits in-between cutout on stock body.
If trimming body straight, measure the full width across and enter custom width.
- Mounts using existing holes in frame. Does not mount like stock plastic bumper(s) - Longer Hardware recommended (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

Name: Element RC Enduro Sendero Roll Bar
Brand: Element RC
Price: 35.0 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

1/10 Scale Full-Size Rear Bumper for Traxxas TRX4 1970's Series (Chevy K5 Blazer, K10 Truck, F150 Truck)

Bumpers front and rear

Front bumper fit perfect looks great rear bumper looks great does fit but the mounts need to be like 1 mm or so wider but still works no modification needed would buy it again

1/10 Scale Full-Size Rear Bumper for Traxxas TRX4 1970's Series (Chevy K5 Blazer, K10 Truck, F150 Truck)

1/10 Scale Full-Width Front Bumper For Axial SCX10 III Base Camp

$53.95 USD

Axial Full-Width Steel, Welded Front Bumper for the Axial SCX10 III Base Camp.

Full width and full scale! This Class 1 worthy low-profile front bumper allows for full tire clearance under full turn & compressionIt even includes the ability to mount a winch behind the grill.

(MADE FOR STOCK VEHICLE- Any modifications may affect clearance)

Specifications:
-195mm wide, raised approx. 20mm above top of frame rails to close body gap.
- Predrilled with mounting holes to fit the RC4WD 9.5 CTI hole pattern. *Bumper is made to allow for a bumper-mounted winch behind the grill/body, not in front.
- Mounts using included hardware. Spacer/additional washers may be necessary.
- Steel construction - Hand Made/Welded.
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

Mounting Instructions:

1. Bumper is made to slide inside the c-channel of the frame rails.

2. Back screws with a washer and nut.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

1/10 Scale Full-Width Front Bumper For Axial SCX10 III Base Camp

1/10 Scale Full-Width Front Bumper for Traxxas TRX-6 Mercedes-Benz G 63 AMG 6x6

$53.95 USD

Full-Size Steel, Welded Front Bumper For The Traxxas TRX-6 Mercedes-Benz G 63 AMG 6x6

Specifications:
-192mm wide
-Bumper Top Plate sites approx. 20mm above the top of the frame rail.
**REQUIRES Trimming of body for fitment. Bumper is not made to fit a winch.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

1/10 Scale Full-Width Front Bumper for Traxxas TRX-6 Mercedes-Benz G 63 AMG 6x6

Traxxas TRX-6 Mercedes-Benz G 63 AMG 6x6 Full-Size Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

1/10 Scale Full-Width Front Bumper for Traxxas TRX4 Sport

$53.95 USD

Full-Size Steel, Welded Front Bumper For The Traxxas TRX4 Sport

Specifications:
-190mm wide
-Bumper Top Plate sites approx. 20mm above the top of the frame rail.
**REQUIRES Trimming of body for fitment. Bumper is not made to fit a winch, but does have pre-drilled holes due to the laser cut top plate that is used.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Traxxas TRX4 Sport Full-Size Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Awesome product

Great fit and finish, great addition to my rig.

I don't like..

...a bumperless truck. Project Yoder is nearly complete! But thanks to ScalerFab it is no longer bunperless! The bumper was made with a custom width and was fabricated to fit perfectly! I installed it pretty flush with the front, but I can still bring it out a ton to fit a winch when that time comes. This is a RC4WD Toyota Tacoma body on a TRX4 chassis.

1/10 Scale Full-Width Front Bumper w/ Stinger for Traxxas TRX4 D90

$58.95 USD

Full-size Steel, welded front bumper w/ Stinger for the Traxxas TRX4 Defender 90
*Pictures depict optional add-ons

Specifications:
-205mm wide
- Brackets specifically for TRX4
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Traxxas TRX4 D90 Full-Size Front Bumper w/ Stinger - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

1/10 Scale Full-Width Front Bumper w/ Trail Bar for Traxxas TRX4 D90

$58.95 USD

Full-size Steel, welded front bumper w/ trail bar for the Traxxas TRX4 Defender 90
*Pictures depict optional add-ons

Specifications:
-205mm wide
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Element RC Enduro Sendero Roll Bar

Lifetime Warranty Info

You may also like

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Lifetime Warranty Info

Promos

DIY Bungee Cord Tutorial

Collaborate with Us!